"Is the engine about to give trouble?"
Answered before it strands a vehicle on the highway.
Real-time engine, temperature and battery diagnostics from your vehicle's OBD data — catch a fault before it becomes a breakdown, not after.
Most breakdowns don't happen without warning
A failing engine or a dying battery almost always shows early signs — rising temperature, unstable voltage, a stored fault code. The problem is that no one's watching those numbers until the vehicle actually stops.
Roadside breakdowns
A fault that could've been caught days earlier instead strands a vehicle mid-route.
Reactive maintenance
Without early visibility, repairs happen after something breaks, not before.
Costlier repairs
A small fault caught early is a cheap fix. Left alone, it usually becomes a bigger one.
One screen, every vehicle's condition
See which vehicles need attention today, instead of checking each one individually.
- Vehicle-wise health status at a glance
- Fault severity visibility, not just a fault count
- Early fault identification before failure
- Better maintenance planning and scheduling
- One centralized health dashboard for the fleet
Catch overheating and battery failure early
Engine temperature alerts
Get notified the moment coolant temperature crosses a safe operating threshold, running or idle.
Running & idle monitoring
Temperature is tracked separately for running and idle conditions, so an idle-time issue isn't missed.
Battery voltage tracking
Spot unstable or dropping battery voltage before it turns into a vehicle that won't start.
Standard OBD-II parameters, read continuously
Vehicle health monitoring works off your vehicle's own on-board diagnostics — the same data a mechanic's scanner reads, just watched in real time instead of once at a service visit.
Everything you need to catch a problem early
Real-time monitoring
Continuous tracking of key vehicle parameters, not a one-time check.
Model-based thresholds
Alert thresholds set to match the vehicle model, not one blanket setting.
Fault code identification
Clear description of the affected system and severity for each fault code.
Engine fault alerts
Notified for misfires, abnormal performance, or sensor failures.
Battery alerts
Flagged the moment voltage falls outside a safe range.
Coolant temperature alerts
Notified when engine coolant runs outside the recommended range.
Diagnostic reports
Health, engine, and fault-code reports available per vehicle.
Maintenance planning
Turn diagnostic trends into a scheduled maintenance plan.
Reduced downtime
Catching issues early keeps more vehicles on the road, more often.
Wherever downtime is expensive
Vehicle Health Monitoring — FAQ
What OBD parameters can be monitored?
Common parameters include vehicle speed, engine RPM, fuel level, coolant temperature, battery voltage, engine load, check-engine (MIL) status, and diagnostic trouble codes.
Is fuel level shown through vehicle health monitoring too?
Yes, fuel level is one of the standard parameters read alongside engine and battery data.
Do I get an overall health status for each vehicle, not just raw numbers?
Yes, the dashboard summarizes fault severity and overall condition per vehicle, so you're not interpreting raw sensor values yourself.
What reports are available under vehicle health monitoring?
Typical reports include a vehicle health report, engine temperature report, battery voltage report, and diagnostic trouble code (DTC) report.
Does this work with any OBD device?
The system is designed to work with standard OBD-II compatible vehicles. Share your vehicle models with our team and we'll confirm exact compatibility before you order.
What alerts does the vehicle health monitoring module send?
Alerts typically cover fault codes, low or unstable battery voltage, and engine coolant temperature crossing safe limits, each tied to the vehicle and time it occurred.